Lan domain setup

To check whether your device has a network adapter, follow the instructions. Tap or click Turn on Windows Firewall under each type of network that you want to help protect, and then tap or click OK. If the devices running Windows Vista are connected to either a hub or a switch using a cable, then they're already on the network, and ready to use. To find other devices running Windows XP or earlier versions of Windows, and to use file and printer sharing on any version of Windows, open these ports:.

If you have devices running Windows XP, you may need to do a little more work to add those devices. Now that you've decided to invest in a wireless network for your business, you have to select a network standard and set up your network.

Wireless networks WLANs don't require much in the way of network infrastructure. Many small business owners select wireless networking because it's flexible, inexpensive, and easy to install and maintain. You can use a wireless network to share Internet access, files, printers, file servers, and other devices in your office. Once you have the network set up, you can enable sharing, set permissions, and add printers and other devices.

The most common wireless network standards are Prices vary for each standard as do data transfer rates. Typically the faster the data transfer rate, the more you pay. In general, data transfer rates for each standard work as follows:. The transfer times listed are under ideal conditions. They aren't necessarily achievable under typical circumstances because of differences in hardware, web servers, network traffic, and other factors.

A wireless router sends information between your network and the Internet by using radio signals instead of wires. You should use a router that supports faster wireless signals, such as For the best results, put your wireless router, wireless modem router a DSL or cable modem with a built-in wireless router , or wireless access point WAP in a central location in your office.

If your router is on the first floor and your devices are on the second floor, put the router high on a shelf on the first floor. If your ISP didn't set up your modem, follow the instructions that came with your modem to connect it to your device and the Internet. If you're using cable, connect your modem to a cable jack. Protect your router by changing the default user name and password. Most router manufacturers have a default user name and password on the router in addition to a default network name.

Someone could use this information to access your router without your knowledge. Check the information that was included with your device for instructions.

To connect to a wireless network, your device must have a wireless network adapter. Make sure that you get the same type of adapters as your wireless router. The type of adapter is marked on the package with a letter, such as G or A. Whenever possible, you should connect to a security-enabled wireless network. If you do connect to a network that's not secure, someone with the right tools can see everything that you do, including the websites you visit, the documents you work on, and the user names and passwords that you use.

A firewall is hardware or software that helps protect your device from hackers or malicious software. Running a firewall on each device on your network can help control the spread of malicious software on your network and help protect your devices when you use the Internet. Swipe in from the right edge of the screen if using a mouse, point to the upper-right corner of the screen and move the mouse pointer down.

If you want to use a USB flash drive to copy network settings to your device instead of typing a security key or passphrase, follow these steps:. A network adapter connects your device to a network.

Make sure that you write the security key and keep it in a safe place. If you have a USB flash drive, you can also save your security key to the flash drive by following the instructions in the wizard.

A workgroup is a group of devices that are connected to a home or small office network and share resources, such as printers and files. When you set up a network, Windows automatically creates a workgroup and gives it a name. In a workgroup:. The Device Name for each device on the network must be unique, and the workgroup for all devices on the network must be the same.

A hybrid network refers to any computer network that contains two or more communications standards such Ethernet A hybrid network relies on special hybrid routers, hubs, and switches to connect both wired and wireless computers and other network-enabled devices. It enables the network to maximize the benefits of both these network types. In a wired computer network, all devices are connected by physical cables to a central access point.

This access point can be a router, hub, or a switch. The function of this access point is to share a network connection among several devices. All the devices are plugged into the access point using individual Ethernet CAT 5 cables. If the devices need to share an Internet connection as well, then the access point is plugged into a broadband Internet modem, either cable or DSL. In a standard wireless network, all networked devices communicate with a central wireless access point that broadcasts a signal.

The devices themselves need to contain wireless modems or cards that conform with one or more Wi-Fi standards, either In this network configuration, all wireless devices can share files with each other over the network. If they also want to share an Internet connection, then the wireless access point is plugged into a broadband Internet modem.

A standard hybrid network uses a hybrid access point, a networking device that broadcasts a wireless signal and contains wired access ports. The most common hybrid access point is a hybrid router. The typical hybrid router broadcasts a Wi-Fi signal using The hybrid router also has a port for connecting to a cable or DSL modem via an Ethernet cable. When shopping for a hybrid router, you might not see the word "hybrid" anywhere. After you determine which of your devices you want to connect with wires and which ones wirelessly, follow the procedures that are listed in Install a wired network , and Install a wireless network respectively to set up these parts of the hybrid network.

There are several different possible network configurations for a hybrid network. The most basic configuration has all the wired devices plugged into the Ethernet ports of the hybrid router, and the wireless devices connected to the router wirelessly. Then the wireless devices can communicate with the wired devices via the hybrid router.

If you want to network more than four wired devices, you can string several routers together, both wired and wireless, in a daisy chain formation. You'll need enough wired routers to handle all of the wired devices the number of devices divided by four. And you'll need enough wireless routers in the right physical locations to broadcast a Wi-Fi signal to every corner of the network. In this way, you can connect both computers and peripherals such as printers and fax machines and place them where it will easy to access them.

When you need the maximum Internet and file-sharing speed for your work, you can plug into the network with an Ethernet cable. Set up your router. Connect a computer to an Ethernet port. Configure the router from that computer. Set up a DHCP server. Set up file and printer sharing. Set up the wireless network optional.

Connect all other computers to the network. Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow.

Download Article Explore this Article parts. Related Articles. Article Summary. Part 1. Count the number of computers you need to hardwire. When setting up a LAN, you'll need to know how many computers will be connecting to the network via Ethernet. This will determine the number of ports you'll need. If you have four or less computers that you need to hardwire, you'll just need a router. If you have more than four, you'll likely need to get a switch to extend the number of ports available on your router.

Decide if you want to create a wireless network. If you want to allow devices to connect wirelessly, you'll need a router that can broadcast a wireless network. Most routers you'll find at the store or online have wireless capabilities.

Network switches do not allow wireless devices to connect, and can only be used for hardwired LANs or to extend the number of ports available to the router. Determine if you want all network devices to have internet access. If you want all of the connected devices to have access to the internet, you'll need a router to handle the connections. If you don't need the devices to have a network connection, you can just use a network switch. Measure the distances for all hardwired devices.

This isn't much of an issue in most homes, but network cables cannot run longer than m ft. If you have to run cable farther than this, you'll need switches in between. Consider your future needs.

If you're filling all of the ports on your hardware, consider future-proofing to allow for more devices in the future. Part 2. Gather your network hardware. To create a LAN, you'll need a router or switch, which will act as the hub of your network. These devices route information to the correct computers. A router will automatically handle assigning IP addresses to each device on the network, and is necessary if you intend to share your internet connection with all the connected devices.

It is highly recommended that you build your network with a router, even if you're not sharing an internet connection. A network switch is like a simpler version of a router. It will allow connected devices to talk to each other, but will not automatically assign IP addresses and will not share an internet connection. Switches are best used to expand the number of LAN ports available on the network, as they can be connected to the router.

You don't need to do much to set up a router for a basic LAN. Just plug it into a power source, preferably close to your modem if you plan on sharing the internet connection through it. Connect your modem to your router if necessary. This is usually a different color from the other ports. Connect your switch to your router if necessary. If you're using a switch to expand the number of ports available on the router, plug an Ethernet cable into any LAN port on the router and any LAN port on the switch.

This will expand the network to the rest of the LAN ports on the switch. Connect your computers to open LAN ports. Use Ethernet cables to connect each computer to an open LAN port on your router or switch. Ethernet cables cannot reliably transfer data at lengths larger than m ft. If you're only using a switch as your network hub, setting up one computer as a DHCP Dynamic Host Configuration Protocol server will allow all of the connected computers to easily obtain IP addresses.

You can quickly create a DHCP server on one of your computers by installing a third-party utility. Add the following to the end of it:. If you use a real domain name in your hosts file, you will not be able to access it on the Internet becouse your computer will resolve it to local IP address.

Here is some troubleshooting if you run into problems. If you want to whip up a quick app go sign up for Adobe Phone Gap.

You get one private project for free. Then just upload your index. If you want to do more than just a basic app, say you want splash screen, custom icon I think you can add it to home screen as an app from Safari, chek here. I might be getting in too deep, but those are your options, and I think making a Phonegap app is several magnitudes less complicated than setting up a DNS server and making it secure.

Sign up to join this community. The best answers are voted up and rise to the top. Stack Overflow for Teams — Collaborate and share knowledge with a private group. Create a free Team What is Teams? Learn more. How to configure domain name within LAN? Ask Question. Asked 7 years, 4 months ago.

Active 7 years, 4 months ago. Viewed 32k times. How can I do it? NOTE: I use windows 7 for server and smart phones will be clients. Improve this question.